HDMI, VGA to LVDS, TTL driver board with touch screen
The LCD driver board is mainly designed for TFT LCD screen. Input signal type: HDMI, analog (RGB, VGA), PAL/NTSC composite video, touch screen can also be added
Specifications of HDMI, VGA to LVDS, TTL driver board
Input single
High-definition HDMI for PC graphics cards
touch screen
Driver board supports touch screen
Output single
LVDS interface, TTL interface
operating temperature
Wide temperature working range: -20℃ ~ +80℃
OSD adjustment function
Connect the OSD function adjustment board to adjust the display parameters
Driver board parameters
parameter
1.The board supports USB Micro 5V voltage input, (the DC socket of the board supports wide voltage input 9V~16V; the typical value is 12V and the default is NC)
2.The board has its own LED backlight drive circuit; it supports 9~25V voltage drive for small and medium-sized LED backlights.
3.The board has its own T-CON circuit, which can directly drive small and medium-sized LVDS/TTL LCD without T-CON
4.Supports PWM duty cycle to adjust backlight brightness
5.Adapt to HD HDMI resolution:320×240, 480×272, 800×480, 800×600, 1024×600, 1024×768, 1280×720, 1280×800, 1280×1024, 1366×768 and other resolutions.
Driver board test points
Label | item | min | typ | max | unit | voltage ripple |
12V | 12V test point | 10.8 | 12 | 13.2 | V | 400mV |
5V | 5V test point | 4.75 | 5 | 5.25 | V | 200mV |
3.3V | 3.3V test point | 3.13 | 3.25 | 3.46 | V | 150mV |
1.8V | 1.8V test point | 1.7 | 1.75 | 1.85 | V | 100mV |
GND | GND | – | – | – | V | – |
BL-EN | BLU control | 0.1 | – | 4.8 | V | – |
BL-PWM | BLU PWM | 0.1 | – | 4.8 | V | – |
Interface Description
iten | Function | Connector specification | Remark |
CN1 | 12V DC power input | 4P, 2.0Pitch, single row, 180°, socket (JST/CVILUX) | |
CN2 | 12V DC power input | positive inside and negative outside, positive outer diameter φ2.0mm, negative inner diameter φ5.5mm | |
CN3 | USB Micro 5V input | USB Micro 5V input | |
CN5 | Mini HDMI input | HDMI-19pin | |
CN7 | OSD adjustment buttons + infrared control interface | 12P, 1.25Pitch, single row, 90° | |
CN12 | HDMI input | HDMI-19pin,90 degrees | |
CN3 | USB Micro 5V input | USB Micro 5V input | |
CN20 | Backlight power supply and control interface | PH2.0MM-6PIN | |
CN18 | TTL-FFC0.5mm-40pin | TTL-FFC0.5mm-40pin | |
CN19 | LVDS-2.0mm,2×10,20pin | LVDS-2.0mm,2×10,20pin | |
CN16 | LVDS-FFC0.5mm-40pin | LVDS-40PIN, default 8bit output | |
CN11 | TTL/RGB-FFC0.5mm-40pin+TCON | TTL/RGB-FFC0.5mm-40pin+TCON | |
CN17 | TTL-FFC0.5mm-50pin | TTL-50PIN default 8bit output | |
CN13 | TTL/RGB-FFC0.5mm-50pin+TCON | TL/RGB-FFC0.5mm-50pin+TCON | |
CN14 | LED backlight voltage output | Connector:SM-POW-2P | |
R2/R52 | LCD power supply options | R52 is shorted to 3.3V, R2 is shorted to 5V |
FPC/cable/interface customization
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
Touch screen or cover glass added
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Customized Display Optical Parameters
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
Customized HDMI to MIPI, RGB, LVDS boards
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458