HDMI to LVDS interface converter
Adapter board for converting HDMI interface to LVDS interface, the maximum resolution is 2560×1440, and the maximum refresh rate is 60Hz. It can be customized according to your requirements, adding touch screen and other functions
Specifications of HDMI to LVDS Converter Board
Input single
High-definition HDMI signal adapted to PC graphics card
Output single
0.5mm-40pin connector L, single 6/8BIT, TTL18bit/24bit
operating temperature
Wide temperature working range: -20℃ ~ +70℃
power requirements
The board supports a wide voltage input of 8V~20V; the typical value is 12V (when the power supply of the screen used is 12V, the power supply of the board must be 12V)
FPC/cable/interface customization
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
Touch screen or cover glass added
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Customized Display Optical Parameters
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
Customized HDMI to MIPI, RGB, LVDS boards
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
