8-inch 800x1280 WXGA tft display
8-inch VGA tft display is widely used in industrial equipment, such as industrial touch all-in-one, industrial tablet, etc. The interface is MIPI
Main parameters of 8-inch tft display
| Item | Specification | Unit |
| Panel Size | 8 | inch |
| Number of Pixels | 800×RGB (3) ×1280 | pixels |
| Active Area | 107.64(H)x172.22(V) | mm |
| Pixel Pitch | 0.13455(H)×0.13455(V) | mm |
| Outline Dimension | 114.66(W) x 184.06 (H) x2.6(D) | mm |
| Number of Colors | 16.7M | – |
| Display Mode | Normally black | – |
| Viewing Direction | All | – |
| Pixel Arrangement | RGB vertical stripe | – |
| Luminance (cd/m^2) | 400(TYP.) | nit |
| Contrast Ratio | 800(TYP.) | |
| Surface Treatment | Anti-Glare | – |
| Interface | MIPI | – |
| Backlight | White LED | – |
| Operation Temperature | -0~50 | ℃ |
| Storage Temperature | -10~60 | ℃ |
| Weight | TBD | g |
Download relevant technical documents
JD9365 data sheet for small lcd display
Specification of 8-inch lcd display
initial code for 8-inch lcd display
Drawing for 8-inch lcd display
FPC/cable/interface customization
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
Touch screen or cover glass added
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Customized Display Optical Parameters
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
Customized HDMI to MIPI, RGB, LVDS boards
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
8-inch tft display drawings and interfaces
8-inch tft display with resolution of 800×1280, IPS display mode, full-directional viewing Angle, brightness of 280cd/m². MIPI interface, the back light source adopts 21 LED lamp beads, 7 in series, 3 series of LED lamp beads in parallel mode, the driving voltage is 9V, the driving current is 140mA.
Interfaces are defined as follows：
Interfaces are defined as follows：
| Pin | Symbol | detail |
| 1 | LEDA | LED Anode |
| 2 | LEDA | LED Anode |
| 3 | LEDA | LED Anode |
| 4 | NC | |
| 5 | LEDK | LED Cathode |
| 6 | LEDK | LED Cathode |
| 7 | LEDK | LED Cathode |
| 8 | LEDK | LED Cathode |
| 9 | GND | |
| 10 | GND | |
| 11 | MIPI-2P | MIPI-DSI data Lane |
| 12 | MIPI-2N | MIPI-DSI data Lane |
| 13 | GND | |
| 14 | MIPI-1P | MIPI-DSI data Lane |
| 15 | MIPI-1N | MIPI-DSI data Lane |
| 16 | GND | |
| 17 | MIPI-CLKP | MIP`I-DSI clock Lane |
| 18 | MIPI-CLKN | MIP`I-DSI clock Lane |
| 19 | GND | |
| 20 | MIPI-0P | MIPI-DSI data Lane |
| 21 | MIPI-0N | MIPI-DSI data Lane |
| 22 | GND | |
| 23 | MIPI-3P | MIPI-DSI data Lane |
| 24 | MIPI-3N | MIPI-DSI data Lane |
| 25 | GND | |
| 26 | NC | |
| 27 | RESET | Reset pin |
| 28 | NC | |
| 29 | IOVDD | Power supply(1.8v) |
| 30 | VDD | Power supply(3.3v) |
| 31 | VDD | Power supply(3.3v) |
8-inch 800 x1280 tft display application cases
The 8-inch, 800×1280 resolution, full-field IPS tft display is large enough to be customized for different brightness levels, as well as different touch screens that can be waterproof to touch, touch under strong interference, and different surface treatments such as anti-glare, anti-fingerprint, and more.
Smart cash register set automatic weighing, automatic label printing, automatic cashier and other functions to increase efficiency. The 8-inch 800×1280 LCD is the right size and resolution for this device.
