6.1-inch 280x1424 tft display
The 6.1-inch tft display has a slender shape (15.8cm long, 3.2cm wide), and supports MIPI and RGB interfaces.
Main parameters of 6.1-inch tft display
|Driver Element||Active Matrix||—|
|Number of Dots||280*1424||Dots|
|Pixel Pitch (W*H)||0.107*0.107||mm|
|Viewing Direction||all direction||—|
Download relevant technical documents
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
6.1-inch tft display drawings and interfaces
The 6.1-inch resolution is 280×1424, which is the display with the largest aspect ratio. The length reaches an astonishing 15.8cm, and the width is only about 3.2cm. The appearance is very narrow and long. The color gamut is 70%, and the IPS display technology has a good viewing angle and color expression ability.
At the same time, it has a strong adaptability to the environment. The operating temperature range: -30°C~85°C, and the storage temperature range: -40°C~90°C, which can operate stably in harsh environments. And it can adapt to high-brightness backlight to realize the ability of sunlight readable.
Support ST7703I/SC7706/SC7705/SC7707/NV3051F/NV3052CGRB driver IC can realize support for MIPI and RGB interface, and can customize the length, shape and interface of display FPC, and can add capacitive touch screen and resistive touch screen to realize perfect man-machine operation.
The outline drawing is as follows: