5-inch 800x480 lcd display, RGB interface TN mode

5-inch 800×480 lcd display, RGB interface TN mode, 16.7M colors, using TN display technology, 12 clock direction

 > 5-inch 800×480 tft display, RGB interface TN mode

Main parameters of 5-inch TFT LCD

ITEMStandard valueUNIT
LCD SIZE5INCH
LCD TypeTFT Negative Transmissive
Driver Elementa-Si TFT Active matrix
Number of Dots800*(RGB)*480Dots
Pixel ArrangementRGB Vertical Stripe
Pixel Pitch (W*H)0.135*0.135mm
Active Area108*64.8mm
Viewing Direction12 clock
Control ICILI6122
Module Size(W*H*T)121.1(W)*76.2(H)*4.75(T)mm
Back LightWhite LED

Download relevant technical documents

ILI6122 data sheet for small lcd display

Specification of 5.0-inch small lcd display

FPC custom service

FPC/cable/interface customization

Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.

Touch display customization service

Touch screen or cover glass added

A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed

Optical Measuring Instruments

Customized Display Optical Parameters

Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added

HDMI to MIPI,RGB,LVDS adapter board

Customized HDMI to MIPI, RGB, LVDS boards

The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458

5-inch tft display drawings and interfaces

5-inch tft display, resolution is 800×480, IPS display mode, full-direction viewing Angle, driver IC is ILI6122 or ILI5960, brightness is 300cd/m². The back light source uses 18 LED lights, 6 LED in series, and three groups of LED lights in parallel. The driving voltage is 20V and the driving current is 60mA.

The outline drawing is as follows:

Interfaces are defined as follows:

Pin Symboldetail
1 LEDKPower supply Cathode input for backlight
2LEDAPower supply Anode input for backlight
3GNDGround
4VCIPower supplyto the internal Analog(2.65V-3.3V)
5-12R0-R7Data bus for red
13-20 G0-G7Data bus for green
21-28 B0-B7Data bus for blue
29GNDGround
30CLKDot clock signal for RGB interface operation
31DISP/NCNot connect
32HSYNCLine synchronizing signal for RGB interface operation
33VSYNCFrame synchronizing signal for RGB interface operatione
34DEata enable signal for RGB interface operation
35SDOSerial data output pin used for the SPI Interface
36GNDGround
37RESETReset signal pin
38SDASerial data input pin in serial bus system interface
39SCLKSCL: Serial clock input for SPI interface.
40CSChip select pin 

5 -inch 800x480 tft display application cases

5-inch tft display, TN display mode, RGB interface suitable for PC processing power is low products, such as PDA, MP4, GPS, etc.

Recent tft display Products

Scroll to Top