4.3-inch 480x800, sunlight readable display
4.3-inch 480×800 tft display, IPS mode, SPI/RGB interface, high brightness display, 350cd/㎡ or 550cd/㎡, sunlight readable display.
Main parameters of 4.3-inch sunlight readable display
|LCD Type||TFT Negative Transmissive||—|
|Driver Element||a-Si TFT Active matrix||—|
|Number of Dots||480*(RGB)*800||Dots|
|Pixel Arrangement||RGB Vertical Stripe||—|
|Pixel Pitch (W*H)||0.18*0.19||mm|
|Active Area||56.16(H) *93.60(V)||mm|
|Viewing Direction||all view direction||—|
|Module Size(W*H*T)||60.86(H) ×102.57× 2.30(H)||mm|
|Back Light||White LED|
Download relevant technical documents
Specification of 4.3-inch small lcd display
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
4.3-inch tft display drawings and interfaces
4.3-inch high-brightness display with a resolution of 480×800 pixels. The monitor features an IPS display mode, ensuring vivid colors and wide viewing angles. The driver IC is ST7701, which supports RGB and SPI interfaces.
For backlighting, we offer two options to meet your specific needs. The first solution uses 10 LED lamp beads, 5 of which are connected in series and then connected in parallel. The working voltage range of the backlight is 14~16V, the current consumption is 40mA, and the brightness is as high as 350cd/㎡, which can provide clear visibility in various environments.
In order to obtain higher brightness, we provide the second option, which is to add film material on the basis of the first backlight configuration. With this enhancement, the brightness of the display has reached 550cd/㎡, ensuring excellent visibility even under bright ambient lighting conditions.
To ensure easy and secure connections, our monitors feature ZIF (Zero Insertion Force) connectors, simplifying the installation process.
Experience the versatility and superior visual quality of our 4.3-inch high-brightness display, which is tailored to meet your display requirements in a variety of applications.
The outline drawing is as follows: