4.3-inch 480x800, sunlight readable display
4.3-inchc 480×800 tft display, IPS mode, SPI/RGB interface, high brightness display, 350cd/㎡ or 550cd/㎡, sunlight readable display.
Main parameters of 4.3-inch sunlight readable display
| ITEM | Standard value | UNIT |
| LCD SIZE | 4.3 | INCH |
| LCD Type | TFT Negative Transmissive | — |
| Driver Element | a-Si TFT Active matrix | — |
| Number of Dots | 480*(RGB)*800 | Dots |
| Pixel Arrangement | RGB Vertical Stripe | — |
| Pixel Pitch (W*H) | 0.18*0.19 | mm |
| Active Area | 56.16(H) *93.60(V) | mm |
| Viewing Direction | all view direction | — |
| Control IC | ST7701 | — |
| Module Size(W*H*T) | 60.86(H) ×102.57× 2.30(H) | mm |
| Back Light | White LED | |
Download relevant technical documents
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
4.3-inch tft display drawings and interfaces
4.3-inch high-brightness display with a resolution of 480×800, using IPS display mode, RGB and SPI interfaces. There are two options for the backlight: the first one uses 10 LED lamp beads, 5 in series and then in parallel, the working voltage is 14~16V, the current is 40mA, and the brightness of the display is 350cd/㎡. The second type adds film material on the basis of the first type, with a brightness of 550cd/㎡. ZIF connector is used.
The outline drawing is as follows:
