3.9-inch 800x220 tft display
The 3.9-inch tft display has a slender shape (9.8cm long, 3.2cm wide), and supports RGB interfaces.
Main parameters of 3.9-inch tft display
| ITEM | Standard value | UNIT |
| Display SIZE | 3.9 | INCH |
| Display Type | a-Si | — |
| Driver Element | Active Matrix | — |
| Number of Dots | 800*220 | Dots |
| Display Color | 16.7M | — |
| Pixel Pitch (W*H) | 0.118*0.112 | mm |
| Active Area | 95.04(H)x112.2(V) | mm |
| Viewing Direction | all direction | — |
| Control IC | ST7703I,SC7706,SC7705 | — |
| Module Size(W*H*T) | – | mm |
Download relevant technical documents
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
3.9-inch tft display drawings and interfaces
The 3.9-inch resolution is 800×220, which is a display with a large aspect ratio. The length reaches an astonishing 9.86 cm, and the width is only about 3.2 cm. The appearance is very narrow and long. The color gamut is 50%, and IPS display technology can provide 85/85/85/85 viewing angles
At the same time, it has strong adaptability to the environment. Operating temperature range: -30°C~85°C, storage temperature range: -40°C~90°C, can operate stably in harsh environments.
ST72568 driver IC can realize the support of RGB interface, and can customize the length, shape and interface of the display FPC, and can add capacitive touch screen and resistive touch screen to customize the brightness of the display
The outline drawing is as follows:
