3.9-inch 480x128 tft display
The 3.9-inch tft display has a slender shape (10cm long, 3.3cm wide), and supports MIPI RGB interfaces.
Main parameters of 6.1-inch tft display
| ITEM | Standard value | UNIT |
| Display SIZE | 3.9 | INCH |
| Display Type | a-Si | — |
| Driver Element | Active Matrix | — |
| Number of Dots | 480*128 | Dots |
| Display Color | 16.7M | — |
| Pixel Pitch (W*H) | 0.127*0.137 | mm |
| Active Area | 95.04(H)x25.34(V) | mm |
| Viewing Direction | all direction | — |
| Control IC | ILI6485 | — |
| Module Size(W*H*T) | – | mm |
Download relevant technical documents
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
3.9-inch tft display drawings and interfaces
The 3.9-inch resolution is 480×128, which is a display with a large aspect ratio. The length reaches an astonishing 10 centimeters, and the width is only about 3.3 centimeters. The appearance is very narrow and long. The color gamut is 50%.
At the same time, it has strong adaptability to the environment. Operating temperature range: -30°C~85°C, storage temperature range: -40°C~90°C, can operate stably in harsh environments.
The ILI6485 driver IC can support the RGB interface, and we are very supportive of your customization requirements, such as the interface, shape and length of the FPC, and can add a touch screen.
The outline drawing is as follows:
