3.5-inch 480x800, sunlight readable display
3.5 -inch480x800 tft display, TN mode, high brightness display, 550cd/㎡, sunlight readable display.
Main parameters of 3.5-inch sunlight readable display
| ITEM | Standard value | UNIT |
| LCD SIZE | 3.5 | INCH |
| LCD Type | TFT Negative Transmissive | — |
| Driver Element | a-Si TFT Active matrix | — |
| Number of Dots | 480*(RGB)*800 | Dots |
| Pixel Arrangement | RGB Vertical Stripe | — |
| Pixel Pitch (W*H) | 0.189*0.189 | mm |
| Active Area | 45.36*75.6 | mm |
| Viewing Direction | all view direction | — |
| Control IC | ST7701 | — |
| Module Size(W*H*T) | 51.3(W)*81.60(L)*2.1(H) | mm |
| Back Light | White LED | |
Download relevant technical documents
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
3.5-inch tft display drawings and interfaces
3.5-inch 480×800 IPS tft display, working temperature -20°C-70°C. The backlight unit uses 7 LEDs connected in series. The working voltage is 19.2V, the current is 20mA, the brightness is 550cd/㎡, and ZIF connector is adopted.
The outline drawing is as follows:
Interfaces are defined as follows：
| Pin | Symbol | Detail |
| 1 | LEDK | LED Cathode |
| 2 | LEDA | LED Anode |
| 3 | GND | Ground |
| 4 | VCI | Digital Power |
| 5 | DR0 | data line |
| 6 | DR1 | |
| 7 | DR2 | |
| 8 | DR3 | |
| 9 | DR4 | |
| 10 | DR5 | |
| 11 | DR6 | |
| 12 | DR7 | |
| 13 | DG0 | |
| 14 | DG1 | |
| 15 | DG2 | |
| 16 | DG3 | |
| 17 | DG4 | |
| 18 | DG5 | |
| 19 | DG6 | |
| 20 | DG7 | |
| 21 | DB0 | |
| 22 | DB1 | |
| 23 | DB2 | |
| 24 | DB3 | |
| 25 | DB4 | |
| 26 | DB5 | |
| 27 | DB6 | |
| 28 | DB7 | |
| 29 | GND | Ground |
| 30 | PCLK | Clock |
| 31 | NC | |
| 32 | HSD | |
| 33 | VSD | |
| 34 | DEN | |
| 35 | IMO | interface select pin |
| 36 | GND | |
| 37 | RESET | Reset |
| 38 | SPI-CS | |
| 39 | SPI-SCL | |
| 40 | SPI-SDA |
