2.86-inch 376x960 tft display,Rectangular display
The 2.86-inch 376×960 tft display has a slender display ratio and high resolution and is especially suitable for small instruments and equipment that require display images. Due to the high resolution, the display uses the MIPI interface, and a touch screen can be added to realize human-computer interaction.
Main parameters of 2.86inch tft disply
ITEM | Standard value | UNIT |
LCD SIZE | 2.86 | INCH |
LCD Type | TFT Negative Transmissive | — |
Driver Element | a-Si TFT Active matrix | — |
Number of Dots | 376*(RGB)*960 | Dots |
Pixel Arrangement | RGB Vertical Stripe | — |
Pixel Pitch (W*H) | 0.0705*0.0705 | mm |
Active Area | 26.51*67.68 | mm |
Viewing Direction | all direction | — |
Control IC | ST7701s | — |
Module Size(W*H*T) | 31.2(W)*76.60(L)*2.4(H) | mm |
Back Light | White LED |
Download relevant technical documents
ST7701 data sheet for small lcd display
Specification of 2.86-inch small lcd display
initial code for 2.86-inch small lcd display
FPC/cable/interface customization
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
Touch screen or cover glass added
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Customized Display Optical Parameters
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
Customized HDMI to MIPI, RGB, LVDS boards
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
2.86-inch tft display drawings and interfaces
2.86-inch tft display, IPS display mode has the advantage of full viewing Angle, resolution is 376×960, driving IC is ST7701, interface is MIPI interface, back light source uses 4 LED beads in series, driving voltage is 12V, driving current is 20 moa, module brightness is 300cd/㎡.
2.86-inch 376x960 tft display video
The outline drawing is as follows:
Interfaces are defined as follows:
Pin | Symbol | Detail |
1 | D0N | MIPI-DSI data Lane 0 negative -end input/output pin |
2 | D0P | MIPI-DSI data Lane 0 positive -end input/output pin |
3 | GND | Ground |
4 | CLKN | MIPI-DSI clock Lane negative-end input pin |
5 | CLKP | MIP`I-DSI clock Lane positive-end input pin |
6 | GND | Ground |
7 | VCI | Power supply for the analog circuit(Type:2.8V) |
8 | IOVCC | Power supply for the digital circuit(Type:1.8V) |
9 | RESET | Chip reset pin |
10 | GND | Ground |
11 | LEDK | Power supply for LED-K |
12 | LEDA | Power supply for LED-A |
2.86 -inch 376x960 tft display application cases
2.86-inch tft display with high resolution and large length and width pen, support MIPI interface, support can play video, mainly used in industrial control fields, such as dashcam, motion camera, small equipment instrument, etc.
Because of its high resolution and large aspect ratio, 2.86 is suitable for slender equipment and has been widely used in the field of scanning and translating pens. It is also widely used in alcohol detection equipment.