2.4-inch 240x320 QVGA display，Rectangular display
2.4-inch 240×320 tft display module is widely used in various equipment, the interface has RGB, SPI for choice
Main parameters of 2.4inch tft display
| ITEM | Standard value | UNIT |
| LCD SIZE | 2.4 | INCH |
| LCD Type | Normally white | — |
| Driver Element | a-Si TFT Active matrix | — |
| Number of Dots | 240*(RGB)*320 | Dots |
| Pixel Arrangement | RGB Vertical Stripe | — |
| Pixel Pitch (W*H) | 0.153*0.153 | mm |
| Active Area | 36.72*48.96 | mm |
| Glass Area (W*H) | 40.58*56.96 | mm |
| Viewing Direction | 12 O’clock | — |
| Control IC | ST7789V | — |
| Module Size(W*H*T) | 42.72(W)*60.26(L)*2.2(H) | mm |
| Approx. Weight | TBD | g |
| Back Light | White LED | |
Download relevant technical documents
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
2.4-inch tft display drawings and interfaces
2.4-inch tft display, 240×320 resolution, IPS display mode, full viewing Angle, four LED lights in parallel, driving voltage 3V, driving current 80mA, brightness is 300-400cd/㎡. The 2.4 “display can operate at -20℃-70℃ and store at -30℃-80℃.
2.4-inch 240x320 tft display video
The outline drawing is as follows:
Interfaces are defined as follows：
| Pin | Symbol | Detail |
| 1 | LEDA | Backlight power supply |
| 2 | LEDK | Backlight power supply |
| 3 | IM2 | GND |
| 4 | IM1 | GND |
| 5 | IM0 | GND |
| 6 | VDD | Power supply 2.8V |
| 7 | DB7 | Data line |
| 8 | DB6 | |
| 9 | DB5 | |
| 10 | DB4 | |
| 11 | DB3 | |
| 12 | DB2 | |
| 13 | DB1 | |
| 14 | DB0 | |
| 15 | RD | Read signal and read data at the low level |
| 16 | WR | Write signal and write data at the low level |
| 17 | RS | select data or command |
| 18 | CS | Chip select |
| 19 | TE | Tearing effect signal is used |
| 20 | RESET | |
| 21 | SDA | SPI interfac input/output pin |
| 22 | GND |
2.44 -inch 240x320 tft display application cases
The 2.44-inch tft display is now the main display for low-end mobile phones. 2.44 LCD displays are cheap, and LCDS offer faster refresh rates, richer colors and longer life. They are widely used in industrial controls and low-end mobile phones.
The 2.44-inch tft display has been recognized by the market for its reliable performance due to its low price. Compared with OLED, the 2.44-inch LCD has much higher production capacity, price and service life.
