13-inch 3000x2000 tft display, eDP interface，3:2 display ratio.
13-inch 3000×2000 tft display Module, eDP interface, 420cd/㎡，3:2 display ratio，3:2 display ratio Suitable for text reading and office software.
Main parameters of 13-inch tft display
| ITEM | Standard value | UNIT |
| Display SIZE | 13 | INCH |
| Display Type | LTPS | — |
| Driver Element | Active Matrix | — |
| Number of Dots | 3000*2000 | Dots |
| Display Color | 16.7M | — |
| Pixel Pitch (W*H) | 0.0915*0.0305 | mm |
| Active Area | 275.4*183 | mm |
| Viewing Direction | all direction | — |
| interface | eDP 1.3 | — |
| Module Size(W*H*T) | 280.65(H) x 196.82(V) x2.3 (D) | mm |
Download relevant technical documents
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
13-inch tft display drawings and interfaces
13 inches IPS mode tft display, full Angle of view, resolution of 3000×2000, and now the pursuit of large aspect ratio is different from this display is 3:2 display ratio, using eDP1.3 interface, module brightness 420cd/㎡, products in line with Rohs standards.
The outline drawing is as follows:
Interfaces are defined as follows：
| Pin | Symbol | Detail |
| 1 | NC | |
| 2 | H_GND | High Speed Ground |
| 3 | Lane3_N | Complement Signal Link Lane |
| 4 | Lane3_P | True Signal Link Lane |
| 5 | H_GND | High Speed Ground |
| 6 | Lane2_N | Complement Signal Link Lane |
| 7 | Lane2_P | True Signal Link Lane |
| 8 | H_GND | High Speed Ground |
| 9 | Lane1_N | Complement Signal Link Lane |
| 10 | Lane1_P | True Signal Link Lane |
| 11 | H_GND | High Speed Ground |
| 12 | Lane0_N | Complement Signal Link Lane |
| 13 | Lane0_P | True Signal Link Lane |
| 14 | H_GND | High Speed Ground |
| 15 | AUX_CH_P | True Signal Auxiliary Channel |
| 16 | AUX_CH_N | Complement Signal Auxiliary Channel |
| 17 | H_GND | High Speed Ground |
| 18 | LCD_VCC | LCD logic and driver power |
| 19 | LCD_VCC | LCD logic and driver power |
| 20 | LCD_VCC | LCD logic and driver power |
| 21 | LCD_VCC | LCD logic and driver power |
| 22 | BIST | LCD Panel Self Test Enable |
| 23 | LCD_GND | LCD logic and driver ground |
| 24 | LCD_GND | LCD logic and driver ground |
| 25 | LCD_GND | LCD logic and driver ground |
| 26 | LCD_GND | LCD logic and driver ground |
| 27 | HPD | HPD signal pin |
| 28 | BL_GND | Backlight ground |
| 29 | BL_GND | Backlight ground |
| 30 | BL_GND | Backlight ground |
| 31 | BL_GND | Backlight ground |
| 32 | BL_ENABLE | Backlight control on/off control |
| 33 | BL_PWM | Backlight PWM Signal Input |
| 34 | H_SYNC | Hysnc signal output |
| 35 | NC |
13 -inch 3000 x2000 tft display application cases
The 13 “3000×2000 resolution tft display features high resolution and high brightness (420nit), and the 3:2 display ratio is perfect for displaying more software content. If you need a computer specifically for people who write code or write text or edit tables, then this is perfect for you.
The 13-inch 3000×2000 resolution lcd screen can be used to make portable displays, extended displays for programmers or data processing workers. The 3:2 LCD screen is perfect.
