128x96 COG display character module
LCD module 128×96 COG display character module, the driver IC is UC1617S, and adoptsI²C bus, 4-wire SPI serial port, 6800 series parallel port, 8080 series parallel port.
Download 128x96 COG Display Character Module technical documents
128x96 COG Display Character ModuleC can display 16 × 6 rows = 96 English, numbers and symbols in 8*16 dot matrix. Or display 21 × 16 rows of English, numbers and symbols in a 5*8 dot matrix. 16*16 dot matrix or other dot matrix pictures can be used to edit Chinese characters by yourself, and it can also be used with Jinglianxun font library IC.
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
128x96 COG display character module drawings and interfaces
The driver IC of 128×96 COG Display Character ModuleC is UC1617S, which supports I²C bus, 4-wire SPI serial port, 6800 series parallel port, and 8080 series parallel port. The backlight adopts two LED lights connected in parallel, the working voltage is 3V, and the working current is 30mA. Module power consumption is less than 100mW.
Working temperature: -20∽+70°C, storage temperature: -30∽+80°C.
The outline drawing is as follows:
Interfaces are defined as follows:
NO. | Symbol | Detail |
1 | VLCD | Chip Select |
2 | VB0- | Low level reset, after the reset is completed, return to high level, the LCD module starts to work |
3 | VB1- | H: data register 0: instruction register |
4 | VB1+ | serial clock |
5 | VB0+ | serial data |
6 | VDD | Positive pole of power supply |
7 | VSS | Ground |
8 | BM1 | Voltage doubler circuit |
9 | BM0 | Voltage doubler circuit |
10 | WR1 | Voltage doubler circuit |
11 | WR0 | Voltage doubler circuit |
12 | RS | LCD double voltage output |
13 | CS | Chip Select |
14 | RST | reset |
15 | D7 | Data Bus |
16 | D6 | Data Bus |
17 | D5 | Data Bus |
18 | D4 | Data Bus |
19 | D3 | Data Bus |
20 | D2 | Data Bus |
21 | D1 | Data Bus |
22 | D0 | Data Bus |