10.1-inch 800x1280 WXGA tft display，Rectangular display
10.1-inch WXGA tft display is widely used in industrial equipment, such as industrial touch all-in-one, industrial tablet, etc. The interface is MIPI
Main parameters of 10.1inch tft display
| ITEM | Standard value | UNIT |
| Module outsize | 143.06(H)x228.66 (V)2.5(T) | mm |
| LCD active aera | 135.36(H)x216.58(V) | mm |
| Display resolution | 800(H)x3(RGB)x1280(V) | dot |
| Screen size | 10.1 | inch |
| Dot pitch | 0.1692(H)x0.1692(V) | mm |
| Color configuration | RGB Vertical stripe | – |
| Support color | 16.7M | – |
| Display mode | Normal BLACK | – |
| Viewing direction | ALL DIRECTION | – |
| LCD type | A-Si TFT | – |
| Weight | TBD | g |
Download relevant technical documents
JD9365DA data sheet for small lcd display
Specification of 10.1-inch small lcd display
Drawing of 10.1-inch small lcd display
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
10.1-inch tft display drawings and interfaces
10.1-inch IPS mode LCD screen, full viewing Angle, resolution 800×1280, drive IC JD9365/HX8394, MIPI interface, backlight using 32 LED lights, each 8 LED lights in series, and then 4 LED lights in parallel, working voltage :26V, working current :80mA,Module brightness 400cd/㎡, the product conforms to Rohs standard, FPC and your motherboard through BTB connection, can be replaced according to your needs other connection.
The outline drawing is as follows:
Interfaces are defined as follows：
| Pin | Symbol | Detail |
| 1 | NC | |
| 2 | VDD | Power supply(3.3V) |
| 3 | IOVDD | Power supply(1.8/3.3V) |
| 4 | GND | |
| 5 | RESET | LCM reset pin |
| 6 | NC | |
| 7 | GND | |
| 8 | DSI-D0N | MIPI-DSI data Lane |
| 9 | DSI-D0P | MIPI-DSI data Lane |
| 10 | GND | |
| 11 | DSI-D1N | MIPI-DSI data Lane |
| 12 | DSI-D1P | MIPI-DSI data Lane |
| 13 | GND | |
| 14 | DSI-CLKN | MIPI-DSI data Lane |
| 15 | DSI-CLKP | MIPI-DSI data Lane |
| 16 | GND | |
| 17 | DSI-D2N | MIPI-DSI data Lane |
| 18 | DSI-D2P | MIPI-DSI data Lane |
| 19 | GND | |
| 20 | DSI-D3N | MIPI-DSI data Lane |
| 21 | DSI-D3P | MIPI-DSI data Lane |
| 22 | GND | |
| 23 | NC | |
| 24 | NC | |
| 25 | GND | |
| 26 | NC | |
| 27 | PWMO | PWM control signal for LED driver(CABC) |
| 28 | NC | |
| 29 | NC | |
| 30 | GND | |
| 31 | LEDK | Backlight power supply |
| 32 | LEDK | Backlight power supply |
| 33 | NC | |
| 34 | NC | |
| 35 | NC | |
| 36 | NC | |
| 37 | NC | |
| 38 | NC | |
| 39 | LEDA | Backlight power supply |
| 40 | LEDA | Backlight power supply |
10.1 -inch 800 x1280 tft display application cases
The 10.1-inch, 800×1280 resolution, full-viewing IPS display is large enough to be customized for different brightness levels, making it widely used in tablet and outdoor displays.
Smart cash register set automatic weighing, automatic label printing, automatic cashier and other functions to increase efficiency. The 10.1-inch 800×1280 LCD is the right size and resolution for this device.
