10.1-inch 1024x600, sunlight readable display
10.1-inch 1024×600 tft display, IPS mode, high brightness display, 750cd/㎡, sunlight readable display.
Main parameters of 10.1-inch sunlight readable display
|LCD Type||TFT Negative Transmissive||—|
|Driver Element||a-Si TFT Active matrix||—|
|Number of Dots||1024*(RGB)*600||Dots|
|Pixel Arrangement||RGB Vertical Stripe||—|
|Pixel Pitch (W*H)||0.28*0.28||mm|
|Active Area||222.72(H) *125.28(V)||mm|
|Viewing Direction||all view direction||—|
|Module Size(W*H*T)||235.00(H) ×143.00(V)× 5.00(T)||mm|
|Back Light||White LED|
Download relevant technical documents
Specification of 10.1-inch lcd display
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
10.1-inch tft display drawings and interfaces
10.1-inch IPS tft display with a resolution of 1024×600, the 4lane LVDS interface is driven by EK79001+EK73215, the backlight uses 42 LED lamp beads, every 6 LEDs are connected in series and parallel, the driving voltage is 17V, the current is 180mA, and the maximum brightness is 750cd/ ㎡.
The outline drawing is as follows: