0.78-inch 128x80 PMOLED Display Module，Rectangular display
0.78 128×80 PMOLED Display Module, Display Mode: Passive Matrix, Display Color: Monochrome (White)
Main parameters of 0.78-inch PMOLED Display Module
| ITEM | Standard value | UNIT |
| Display SIZE | 0.78 | INCH |
| Display Type | PMOLED | — |
| Driver Element | Passive Matrix | — |
| Number of Dots | 128*80 | Dots |
| Display Color | Monochrome (White） | — |
| Pixel Pitch (W*H) | 0.175*0.175 | mm |
| Active Area | 9.684*17.26 | mm |
| Viewing Direction | all direction | — |
| Control IC | SH1107 | — |
| Panel Size(W*H*T) | 12.13(W)*23.6(L)*1.22(H) | mm |
Download relevant technical documents
SH1107 data sheet for small oled display
Specification of 0.78-inch small oled display
initial code for 0.78-inch small oled display
Customize the length, width and thickness of FPC or cable, adjust the pin arrangement according to the interface type, and select the appropriate connector. Make your display or circuit board simple and safe with an excellent FPC solution.
A touch screen can be added according to your requirements, there are three options: resistive touch screen, capacitive touch screen, infrared touch screen. Or add protective glass as needed
Display screens with different optical parameters can be designed according to needs, such as brightness, color gamut, response time, gamma and other parameters, and anti-glare, anti-fingerprint coatings, etc. can also be added
The circuit board we designed can convert the interface of your display into an HDMI interface. If your product does not have any display control capabilities, you can use our serial display and only need to use simple commands to control the displayed content through RS232/458
0.78-inch OLED Display drawings and interfaces
The 0.78-inch monochrome oled has a resolution of 128×80 and can display white. The driver IC is SH1107, which supports SPI serial interface. Active area: 9.68mmx17.26mm. Welded FPC is adopted, and the length of display screen fpc and interface definition are supported. If you have custom needs, please contact us.
The outline drawing is as follows:
Interfaces are defined as follows：
| Pin | Symbol | Detail |
| 1 | NC | NC |
| 2 | VPP | This is the most positive voltage supply pin of the chip. It must be supplied externally |
| 3 | VCOMH | |
| 4 | VDD | This is a voltage supply pin. It must be connected to external source |
| 5 | IM1 | Communiicatiing Protocoll Sellect: SPI interface: IM1 is low,IIC interface：IM1 is high |
| 6 | IREF | Current Reference for Brightness Adjustment |
| 7 | CS | This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation. |
| 8 | RES | This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation. |
| 9 | DC | Data/Command Control |
| 10 | D0 | Data transmission line |
| 11 | D1 | Data transmission line |
| 12 | VSS | |
| 13 | NC |
0.78 -inch 128 x80 OLED application cases
The size of 0.78 inch OLED is 12.13(W)*23.6(L)*1.22(H), the shape of the rectangular display, compared with LCD display, OLED has no backlight, in the case of violent vibration is not easy to problem, so it is suitable for use in fitness equipment.
Medical devices need the display screen to have sufficient stability, so as not to delay treatment due to abnormalities in the process of emergency use. The 0.78 inch OLED display screen is simple in structure, easy to drive and relatively power saving, so it is the first choice for some small medical devices such as oximeter.
